dk20

  by    0   0

Trawl Resistant Shield – Model DK20

Specifically designed to protect the new generation of ADP’s and ADCP’s from fishing gear depredation, available in several models for any application.

Functions:

The DK20 series is designed for use in harbours, estuaries, and semi-protected waters. Other models are available for virtually any application.
Deflects fishing gear up and over sea-bed deployed electronics.
Recoverable and reusable.
Available in lowered, diver deployed and free fall models.

Features:

The shield is a truncated pyramid, built of marine grade aluminium, with 316 stainless fittings.
The instrument is mounted in the centre of the shield, in a gimbal with 200 travel.
The shield utilises a pop-up buoy and acoustic release for retrieval.
Ballast of lead shot is used to balance the shield. Ballast can be added or removed as required, depending on what optional batteries and instrumentation are installed.
Hand holds are provided for lifting, retractable rods and guides are used for lowering.
Hold-down pads and a cable passage are provided on diver-deployed units.
Weight less than 130 lbs (60 kg) in air.
eneral Arrangement – DK20-xxxxB

General Arrangement shows Sontek 250 kHz ADP.
dk20draw
Dimensions in mm.


Related Posts

dk135

The TRSP is used to protect bottom mounted equipment, primarily ADCP’s, from depradation by fishing trawls. They have been used extensively on the continental shelf of the North Atlantic, in the Gulf of Mexico and the Yellow Sea. The TRSP has no actual working depth rating, as all modules are free-flooding. The range of the […]

READ MORE →

dk30

Specifically designed to protect the new generation of ADP’s and ADCP’s from fishing gear depredation, available in several models for any application. Model DK30-XxxxB Model shown is configured for a Sontek 250kHz ADP, with battery pack. Functions: The DK30 series is designed for use in the harshest environment. Other models are available for virtually any […]

READ MORE →

Bionesstm Net Control System

A Control and Display System for all Zooplankton Net Systems Graph CTD Data in Real Time Drop Nets on Command True Real-Time Control Pre-program Autonomous Runs Generate Raw & Converted Data Files Retrofit Most Scientific Net Systems Plug & Play with Most CTD’s Stepper Motor Controller Built In Battery Packs Included Supplied Complete with Molded […]

READ MORE →

RMT

The designation “2+8” indicates effective net mouth sizes (at 45 deg angle) of: Top Net: 2 sq metres  Bottom Net: 8 sq metres An RMT 2+8 raised on a crane, with top net in the open position.

READ MORE →

tucker trawl

The Tucker Trawl is an opening and closing mid-water zooplankton trawl. It is typically equipped with a full suite of instruments, including inside and outside flow meters, CTD, pitch sensor and stepper motor. Open Seas supplies the Tucker Trawl with their Bioness data logger, which can open and close nets either in real time or […]

READ MORE →
Back to Top